The ice maker is not working properly, and the ice cubes are empty inside in Whirlpool Refrigerator
Brand: WhirlpoolModel: W1TXEMMWT00
Sometimes, this problem is accompanied by issues with the water dispenser, where the water either flows very slowly or stops after a few seconds. The main issue here is a restriction in water flow. The Whirlpool refrigerator’s ice maker dispenses water based on time (usually around 6 seconds for this refrigerator model), and if there is a restriction in water pressure, it may not fill up the ice mold properly. There can be several potential sources of the problem:
1. Low water pressure in the line connected to the refrigerator.
2. An old or clogged water filter.
3. A malfunctioning filter housing.
4. A faulty main inlet water valve or ice maker water valve (if not part of an assembly).
If the issue lies with the valves or filter housing, replacing them is usually the solution. If it’s the water filter, you can simply replace it with a new one. However, if the problem is related to low water pressure in the line (normal range is 70 to 130 psi), you may need to call a plumber to address issues with the water line leading to the refrigerator or replace the valve (commonly located under the sink).
In some cases, you can try adjusting the adjustment screw on the ice maker, which controls the duration of water fill. By increasing the fill time, you can ensure that the ice maker receives an adequate amount of water.
We ensure a fast and guaranteed fix for your Whirlpool refrigerator’s ice maker
If you’re experiencing a similar issue with your ice maker, you can attempt these troubleshooting steps yourself. If they don’t resolve the problem, don’t hesitate to reach out to us. Our technicians are experts in appliance repair, and we know this refrigerator model inside and out, ensuring a fast and guaranteed fix for your Whirlpool refrigerator’s ice maker.
The repair was done in Lutz, FL