During a routine service call, a technician encountered temperature-related issues with a Kenmore refrigerator requiring a freon recharge. Following a diagnostic assessment, it was evident that the refrigerant levels in the system were significantly low. The technician proceeded to pressure-test the system with nitrogen and identified microleaks in the refrigerator’s evaporator coil.
The recommended solution was to replace the coil and recharge the system with the necessary amount of refrigerant. However, the cost of this repair relative to the value of the refrigerator made it a relatively expensive option. In light of this, the customer requested alternative solutions to address the issue.
Stop-leak injection and freon recharge for the Kenmore refrigerator
As an alternative, we proposed injecting a special stop-leak substance into the system and recharging it. This solution proved to be a cost-effective option, and the customer agreed to proceed with it. The technician began by vacuuming the system to remove any traces of nitrogen, recharged the system with the required amount of refrigerant as indicated on the refrigerator’s sticker, and introduced the special stop-leak substance.
Following these steps, the refrigerator resumed its proper functioning. This cost-efficient solution not only resolved the refrigerant issue but also allowed the customer to avoid the high expenses associated with replacing the evaporator coil. We are committed to providing practical and budget-friendly alternatives while ensuring that appliances perform optimally. If you encounter similar problems with your appliances or require assistance, please do not hesitate to reach out to us. We are here to offer reliable solutions tailored to your needs.
The repair was done in Saint Petersburg, FL
If you encounter similar problems with your appliances or require assistance, please do not hesitate to reach out to us for appliance repair in St Petersburg.
The customer said that his Maytag Range stove beeps and shows error code F2 E0. The oven does not work, but the cooktop works. This error code means that some key is stuck on the oven user interface. If this error occurs, you need to replace the oven electronic control board. Our technician replaced this board, tested it and the oven worked again. The customer is happy and so are we!
For prompt and reliable appliance repair in Oldsmar, our expert technicians are ready to restore your appliances to optimal performance.
Contact us today for swift assistance.
Our team recently addressed a leak issue with a Maytag washer, pinpointing a torn leaky Door Boot Gasket as the culprit. Over time and with frequent use, these rubber seals can wear out, leading to leaks. Unlike some other problems that might have temporary fixes, a torn Door Boot Gasket requires replacement due to the significant stress and vibrations it endures during machine operation.
Maytag washer leaky door boot gasket replacement
Replacing this gasket isn’t a straightforward task. It involves a series of steps, starting with removing the front panel’s locking ring. Next, detach the washing machine’s top cover, followed by fully removing the front panel after disconnecting the door lock. Subsequently, you’d remove the second locking ring from the drum side to proceed with the replacement. Typically, this procedure can take anywhere from 30 minutes to an hour.
Given the intricacies involved and the specialized tools required, this isn’t a DIY task for everyone. Additionally, if you lack experience or the necessary tools, it’s challenging to undertake this repair. Fortunately, our technicians possess the expertise, tools, and skills required to handle such tasks efficiently. Whether it’s a Maytag, LG, or any other brand, our professionals can promptly diagnose and resolve washing machine issues. If you’re grappling with a similar problem or any washing machine malfunction, don’t hesitate to give us a call. We’re committed to providing timely and reliable solutions for all your appliance repair needs.
The customer requested us to recharge the refrigerant freon recharge in their KitchenAid refrigerator. After a thorough diagnostic assessment, our technician determined that there was indeed a minor refrigerant leak present. Unfortunately, locating and repairing the exact source of this leak proved to be challenging. In light of this, the decision was made to recharge the refrigerator with Freon and introduce leak-stopping agents into the system.
Refrigerator KitchenAid Repair: Refrigerant Freon Recharge
Our technician added approximately three ounces of Freon and half an ounce of leak-sealing agent to the refrigerator’s system. Following this procedure, the refrigerator began to freeze efficiently once more. Ideally, we would have preferred to identify the specific leak location and rectify it by either replacing the coil or welding it. However, in this particular case, the refrigerator was rather old. Therefore, the customer opted not to invest a significant amount of money into repairing it.
We respect the customer’s decision. We are always prepared to offer alternative solutions for resolving problems with a guarantee on our work. Our priority is to provide effective and cost-efficient solutions while ensuring that the appliance functions as expected. If you encounter similar issues or have any other appliance-related concerns, please do not hesitate to contact us. We are here to assist and offer reliable solutions tailored to your specific needs.
Our skilled technicians recently completed a top-notch appliance repair in Seminole, bringing another appliance back to life.
From refrigerators to ovens, we provide trusted appliance repair services across Florida-quick, efficient, and hassle-free.