When our tech came to the customer, he saw a completely disassembled dryer. The client tried to find the cause of the failure. The dryer does not respond to button presses and it seemed completely dead. In fact, the reason was the faulty electronic control board. The power was on, but it was faulty and wouldn’t turn on. We replaced this board and the dryer began to work as before
At our next service call there was a problem with the burned heating element. Dryer didn’t dry his clothes. But the diagnosis also found that the idler pulley jammed and the belt worn off to the metal base. Of course, our tech reported this to the customer and after he agreed, tech replaced the heating element and pulley idler. If idler pulley would not be replaced, the belt would soon have torn and the drum would not rotate
The customer complained that his refrigerator Whirlpool runs continuously, and he hears the compressor running all the time. This refrigerator model doesn’t have a complex control system, and the compressor’s operation directly depends on the temperature thermostat.
Upon checking the thermostat, the technician found that it wasn’t turning off, and after opening the thermostat, they discovered that the contacts inside were fused. Therefore, the thermostat needed to be replaced. After replacing the thermostat, the refrigerator started working normally again, and the customer was satisfied. Should you encounter other problems, such as a Whirlpool Ice Maker is not working, don’t hesitate to contact us for a professional fix.
The repair was done in Wesley Chapel, FL
A customer contacted us about their Kenmore washing machine, reporting an issue with the drain pump not efficiently draining water and causing a failure to complete the wash cycle. Upon inspection, our technician identified a problem with the drain pump. The pump emitted a humming sound, indicating that it was running, but water was not draining. This situation suggested a potential blockage or damage within the drain pump assembly.
To investigate further, the technician needed to disassemble the washing machine. Specifically, this involved addressing the stacked unit configuration, which included both the washer and dryer. The challenge was that the washer and dryer were tightly integrated, requiring careful removal of the top dryer unit, the detergent drawer, and the front panel. This was necessary to access the drain pump assembly.
Once the technician successfully disassembled the components obstructing access, they were able to remove the drain pump assembly for a thorough examination. This step allowed for a comprehensive inspection and assessment of the drain pump’s condition. It became evident that the pump was indeed faulty, with a broken bronze bushing inside the impeller. This issue caused the rotor motor to spin without the impeller rotating, resulting in a lack of pressure for draining.
Given that Kenmore appliances often share components with LG, the technician had a replacement pump (LG part 4681EA2001T) readily available. This pump is a crucial component for washing machine repairs.
After replacing the defective pump and reassembling the components, we restored the washing machine to full functionality. The customer expressed satisfaction with the prompt and guaranteed resolution of the complex issue.
If you’re dealing with issues like Kenmore Washing Machine E41 error, or any other washing machine malfunction, including drainage issues, we’re here to help. Contact us for professional assistance, as our technicians are experienced, well-equipped, and capable of delivering quality repairs on the first visit. Call us, and we will help you promptly and with a guarantee!
Our client said that drum belt broke and we need to replace it. When tech started to replace the belt he also found the wear of the pulley idler and recommended the customer to replace it too before it’s too late. The customer agreed and the tech replaced both parts
The customer contacted us regarding cracks in the Amana range glass cooktop. He accidentally broke it and wanted to repair it instead of spending money on a new range. We ordered a new glasstop, and our technician successfully replaced it.
Unfortunately, glass cooktops are susceptible to cracking if something heavy is dropped on them. The only way to resolve this issue is to replace the glass top. Feel free to contact us for assistance if you have cracks in your Amana range glass cooktop or are experiencing any appliance problems. Our team of professionals won’t leave you in a lurch, and we’ll schedule a service visit for you with a convenient one-hour window.
The repair was done in Holiday, FL
We responded to a service call for a malfunctioning Whirlpool washer with clear issues related to the washing cycle due to a malfunctioning door switch. Despite filling with water, the machine failed to proceed with washing and spinning cycles. This basic model utilized a mechanical door switch to determine whether the door was open or closed.
The Whirlpool washing machine, among various other models, utilizes a consistent door switch design commonly referred to as a “lid switch.” However, a noteworthy issue often arises with these switches. They are prone to a specific problem where the switch can disintegrate into two halves, rendering it nonfunctional. This unfortunate occurrence results in the machine being stuck in an “open door” state. Consequently, it prevents the initiation of both wash and spin cycles.
The solution to this problem involves replacing the faulty door switch with a new one. This is precisely what we executed on this particular washing machine. It is crucial to highlight the importance of not bypassing or using a makeshift solution for the door switch. Doing so poses safety risks that should not be overlooked. Using a bypass can lead to dangerous situations. For instance, opening the door during the spin cycle may cause the drum to continue spinning, potentially causing injuries.
For a safe and effective resolution, replace the door switch with a new one. Our technicians carry a comprehensive inventory of spare parts for washing machines, including these door switches, ensuring that we can address such issues promptly during the initial visit. If you encounter a similar problem with your washing machine, do not hesitate to contact us. We possess the expertise and necessary parts for efficient appliance repair in Brandon, providing a reliable solution from the first service call. Call us, and we’ll be there to assist you!
The client complained that during drying he hears a strange loud noise and he wants to fix it. Our tech found that one of the drum roller was worn and broken. Based on the experience of repairing Amana brand such severe damage is not common. Tech has installed a new stronger drum roller
The customer invited us to complete repair after other company. Those guys tried to change the door gasket and broke a part of the body where the door gasket shall be sealed. Unfortunately that metallic rim was a part of the body and it is impossible to order or repair it separately from the rest of the body. So the client decided to buy a new dishwasher.
The customer complained that the ice maker was working, but ice was not dispensing in the Whirlpool refrigerator. The technician found that the microswitch did not make a clicking sound when the pedal was pressed. Upon disassembling the dispenser panel, it was discovered that the mounting points of the microswitch had broken off. This prevented the microswitch from being pressed to activate the auger motor.
Ideally, the solution would be to replace the plastic housing inside the dispenser that holds the microswitches for ice and water dispensing. However, the manufacturer has discontinued this part. The technician made a repair by drilling two holes and attaching the microswitch to the plastic frame at the same location. This allowed the system to work again. Sometimes, with the right knowledge, appliances can be fixed without using new parts. However, every repair is unique and individual.
The repair was done in Trinity, FL