Efficient Installation of a New Drum Assembly in Samsung Washing Machines by Professional Technicians

Attention: Installation of a new drum assembly in Samsung washing machines is a complex undertaking that should only be handled by qualified professionals.

Our client reached out to us with a perplexing issue – their Samsung washing machine was failing to complete cycles, leaving laundry in a damp state. Upon investigation, our technician identified a significant problem: the washing machine was not engaging in the spin cycle after completing the main wash cycle.

Corrosion, Overload, and Spider Malfunctioning

The root cause was traced to a substantial mechanical issue involving the drum assembly. The drum is connected to the motor through a shaft, with a component called the spider securing it at the end. Over the years, this spider, made of an aluminum alloy, undergoes corrosion, diminishing its original strength. Overloading the washing machine, especially with heavy, unbalanced items like rugs, can put excessive stress on the spider. This strain can cause the spider to malfunction or break down. This can lead to the spider breaking, causing the drum to detach from the axis connected to the motor.

In some instances, the damage to the spider is partial, allowing the washing machine to continue with washing cycles. However, during the spin cycle, a severe imbalance occurs, prompting the machine to halt – precisely the issue our client experienced.

Repairing such a problem is exceptionally intricate and often comes with a substantial cost. To replace the spider, the entire washing machine needs disassembly, requiring removal of the drum assembly as a whole. This process involves dismantling the outer shell and extracting the axis from the bearings. Detaching the spider from the drum can be challenging due to corrosion. Subsequently, the new spider is installed on the drum, and the assembly is reinserted into the outer shell, along with a new seal.

Sometimes, opting for an entire drum assembly replacement can be more cost-effective. The assembly as a whole costs more than just the spider. However, replacing the assembly requires much less labor, which helps keep the overall repair cost comparable. Additionally, with this approach, clients receive a brand-new drum, new bearings, and a new outer shell – a considerable advantage.

Samsung washing machines new drum assembly replacement

In the case of our client, they opted for the drum assembly replacement. Our technician efficiently replaced the drum with the outer shell, completing the repair in less than an hour. While this repair demands meticulous attention, our experienced specialists are well-versed in navigating the intricacies of dismantling and reassembling washing machines.

If you are facing issues with your Samsung washing machine, no matter how complex, you can trust our company’s experts. With extensive experience and attention to detail, we are ready to address even the most challenging appliance repair problems. Feel free to call us for reliable and professional service.

The repair was done in Tarpon Springs, FL

Burner is not working in KitchenAid Range

We arrived at the customer’s location to fix the issue with their KitchenAid Range Burner that was not working. The technician first inspected the burner itself and found no issues. Then, he opened the panel with the switches and immediately identified the problem. The switch was in terrible condition. The silver contacts inside had corroded, causing sparking during operation, and eventually, the switch had burnt out. This is not related to the improper use of the range; it’s just that this particular model is basic, and sometimes manufacturers made components with defects that lead to quicker failures.

Repairing a KitchenAid range burner that is not working

Our technician replaced the switch, and the burner started working again. Please, do not attempt to change the switch on your own! It may seem simple, but you could easily misplace the wires, leading to a short circuit. We are always ready to professionally and with a warranty repair your appliance. Our technicians have extensive experience in repairing appliances of all brands.

The repair was done in Largo,FL

The Frigidaire Refrigerator ice maker is not working

A customer contacted us with a problem with their Frigidaire Refrigerator: the ice maker is not working. The ice maker was not dispensing ice.

The Frigidaire refrigerator ice maker is not working: Troubleshooting and Fix

After diagnosing the ice maker, it was found that its heating element was malfunctioning. The heating element warms the mold to make the ice release easily. This issue also prevented the ejector from pushing out the ice, causing its gear to wear out as the main motor constantly attempted to turn it. The diagnosis was clear, and we replaced the ice maker with a new one. This is a popular ice maker model, and every one of our technicians always keeps a spare in stock, so we are ready to solve your problem on the first visit. If you’re also experiencing issues like Ice are hollow in the Frigidaire refrigerator, please don’t hesitate to contact us. We’re here to assist you and ensure your appliance is functioning properly.

The repair was done in Redington Beach, FL

Torn belt Kenmore Dryer

The client called for us to change the belt. In this model there was the belt of standard size and we replaced it for a new and more duty belt

The GE refrigerator is not cooling sufficiently

Customer called to report that their GE refrigerator is not cooling sufficiently. We went to a customer’s place where both the freezer and the refrigerator were not cooling sufficiently.

GE refrigerator is not cooling sufficiently: Troubleshooting and Fix

After inspecting the evaporator and observing the snow pattern, we decided to check the refrigerant pressure in the system since such a pattern indicates a refrigerant leak. The technician found that the system was almost completely empty, but after testing the nitrogen pressure in the system, it was revealed that the leak was very minor, and there was no point in attempting to physically locate and repair it. Instead, we could recharge the system with refrigerant and add a special stop-leak. The customer agreed, and we performed this repair. After recharging the system with refrigerant and adding the stop-leak, the refrigerator started working properly again. If your GE refrigerator is not cooling properly or you’re dealing with a similar issue, we’re always ready to assist you!

The repair was done in Palm Harbor, FL

The GE refrigerator is not cooling properly in the freezer and refrigerator compartments

We arrived at another service call for a GE refrigerator that was not cooling properly in the freezer and refrigerator compartments. The technician immediately understood the cause as he saw frost buildup on the back panel in the freezer. The defrost system was malfunctioning. Upon removing the cover, the evaporator coil was found to be completely clogged with frost.

This problem arises when the defrost cycle stops working correctly. It can be related to a faulty defrost heating element, defrost thermostat, defrost thermistor, or Control Board. The technician determined that the defrost thermostat was malfunctioning, and voltage was not supplied to the heating element. This caused the frost on the evaporator to never thaw, leading to a cessation of air circulation through the evaporator.

The GE refrigerator is not cooling properly: Fix

The technician defrosted the evaporator using a steamer, replaced the thermostat with a new one, and after that, the refrigerator started functioning properly. Our service vehicles are stocked with a wide range of spare parts, so we are ready to repair your appliance on the first visit. Feel free to contact us.

The repair was done in Oldsmar, FL

Electrolux Washing Machine Error E41: Troubleshooting No-Wash Issue

A client contacted us with an Electrolux Washing Machine Error E41, the washer refused to initiate cycles. Our experienced technician promptly responded to diagnose and address the issue. The Electrolux E41 error code indicated a deeper problem that needed professional attention.

Entering the diagnostic mode revealed an error code E41 stored in the machine’s memory. Error E41 typically signifies a communication breakdown between the control board and the door lock, with the control board erroneously registering the door switch as open, even when closed. This confusion can result from damaged contacts or a malfunctioning plastic pusher within the door lock mechanism.

Given that this was an older model, it lacked the feature to alert the user about the specific malfunction. As a result, the machine simply halted without providing clear guidance. The technician’s expertise came into play as they identified the root cause of the problem.

How We Fixed Electrolux Washing Machine Error E41

To resolve the Electrolux E41 error code of the washer, our technician replaced the faulty door lock mechanism. The door lock is a critical component that ensures the safe operation of the washing machine by securing the door during cycles. Over time, wear and tear or component failure can lead to issues such as those encountered in this case.

The replacement process was executed with precision, addressing the malfunction and allowing the washing machine to resume normal functionality. The client, relieved that their appliance was back in working order, appreciated the efficient and effective service provided by our skilled technician.

Professional Washing Machine Repair

It is crucial to note that issues like the one described can be resolved promptly with professional intervention. Our team at Smart Appliance Services specializes in diagnosing and repairing various washing machine problems, ensuring that your appliance operates efficiently and reliably.

If you are experiencing any anomalies or malfunctions with your washing machine, do not hesitate to contact us. Our team of experts is dedicated to providing accurate diagnostics and effective solutions to get your appliance back on track. Remember, a quick response to appliance issues can prevent further damage and extend the lifespan of your valuable appliances. Call us today for reliable and professional appliance repair services.

The repair was done in Saint Petersburg, FL

If you’re facing appliance issues in St. Petersburg, FL, our team offers prompt and reliable repair services to restore your appliances to optimal working condition. We offer fast appliance repair in St. Petersburg, FL, and the surrounding areas.

Won’t dry clothing though motor works Electrolux Dryer

Not every dryer is equipped with the belt switch. Like in this case when the belt is worn-out and torn, the motor and the heating element still work but the clothes are not drying. We replaced the belt with a new one.

Sometimes Whirlpool Dryer stopped during the drying cycle

Contrary to the client’s complaints about stops, during our tech’s visit the dryer worked seamlessly. Following careful inspection unveiled that the door switch looked a bit burnt. It meant that the switch inside contacts got burnt resulting in accidently lost contact, so the dryer stopped deeming the door opened. The switch replace solved the issue.

mw3