Loud squeak during drying Whirlpool Dryer

The client explained that the dryer produces a loud squeaking sound. The reason for that was a bit blocked and worn-out idler pulley. In most cases it happens to Whirlpool and Samsung dryers. First, the pulley begins to jam and the belt rubs the groove on it, then the roller stops completely and the belt rubs against it and breaks. If there is no a switch, then the dryer will continue to work without drum rotation, the motor will work upon that, but the clothes will not dry. In such cases there shall be replaced only the idler pulley or also the belt too if necessary. 

The ice maker in the LG refrigerator is not working

The customer called us to solve the issue with the ice maker in the LG refrigerator which is not working. Upon arriving on-site, our technician promptly conducted a thorough diagnostic, which ultimately revealed the root cause of the problem. In fact, LG refrigerators typically have ice makers built into the left door of the fridge. These ice makers, utilize the cold air from the freezer section to produce ice. In addition to the main freezer fan, there is another fan installed inside the freezer, specifically for the ice maker. Two channels for air circulation are set up between this fan and the ice maker inside the left wall of the refrigerator.

In this case, it was discovered that the freezer door was not sealing properly for some reason. Warm room air was infiltrating into the freezer. Consequently, during circulation, this warm air rapidly condensed near the ice maker’s fan. Without the circulation of cold air, the ice maker couldn’t freeze the water and ceased working.

How we fixed a not working ice maker in the LG refrigerator

Our technician defrosted the ice around the fan, ensuring that air circulation was restored, and the repair was complete. The customer didn’t have to spend a dime on replacing any parts and was satisfied with our service. The key to a technician’s work is accumulated knowledge over the years, and it’s the guarantee of successful and prompt repairs. We are always prepared to address any problems with your refrigerator, whether it’s a malfunctioning ice maker or if your LG Refrigerator does not cool enough, so don’t hesitate to contact us for help.

The repair was done in Belleair, FL

The ice maker is not working properly, and the ice cubes are empty inside in Whirlpool Refrigerator

Sometimes, this problem is accompanied by issues with the water dispenser, where the water either flows very slowly or stops after a few seconds. The main issue here is a restriction in water flow. The Whirlpool refrigerator’s ice maker dispenses water based on time (usually around 6 seconds for this refrigerator model), and if there is a restriction in water pressure, it may not fill up the ice mold properly. There can be several potential sources of the problem:

1. Low water pressure in the line connected to the refrigerator.

2. An old or clogged water filter.

3. A malfunctioning filter housing.

4. A faulty main inlet water valve or ice maker water valve (if not part of an assembly).

If the issue lies with the valves or filter housing, replacing them is usually the solution. If it’s the water filter, you can simply replace it with a new one. However, if the problem is related to low water pressure in the line (normal range is 70 to 130 psi), you may need to call a plumber to address issues with the water line leading to the refrigerator or replace the valve (commonly located under the sink).

In some cases, you can try adjusting the adjustment screw on the ice maker, which controls the duration of water fill. By increasing the fill time, you can ensure that the ice maker receives an adequate amount of water.

We ensure a fast and guaranteed fix for your Whirlpool refrigerator’s ice maker

If you’re experiencing a similar issue with your ice maker, you can attempt these troubleshooting steps yourself. If they don’t resolve the problem, don’t hesitate to reach out to us. Our technicians are experts in appliance repair, and we know this refrigerator model inside and out, ensuring a fast and guaranteed fix for your Whirlpool refrigerator’s ice maker.

The repair was done in Lutz, FL

mw2

The stovetop and oven in the Frigidaire Range are not working


The customer called us to report that the stovetop and oven are not working on the Frigidaire range. This can sometimes happen when you purchase a new stove and trust the installation to delivery guys. These persons may not always realize the importance of properly tightening the nuts on the power cord terminal block. If this detail is overlooked, and a poor connection is left in place, the voltage drop at the connection point can increase significantly, causing the contacts to heat up to extremely high temperatures. In the best-case scenario, this leads to wire burnout, but it could also potentially result in a fire.

We are repairing the stovetop and oven in the Frigidaire range that are not working

Our technicians always carry spare 4-prong cords for range connections and replacement terminal blocks. In this instance, the customer avoided a fire, and we replaced the terminal block and cord, restoring the range’s functionality. We are always ready to handle repairs of any complexity, no matter how small, with the assurance of quality work and a warranty.

The repair was done in Dunedin, FL

The Samsung refrigerator’s ice maker is not working

If your Samsung refrigerator’s ice maker isn’t working, don’t worry, we know how to fix it. That is the most common issue with Samsung refrigerators, without exaggeration. In most cases, the problem isn’t with the ice maker itself but with the design. No other manufacturer has such an issue!

Samsung Refrigerator Ice Maker: A Long History of Design Flaws

If you look on YouTube, you’ll find tons of videos with this problem and various solutions. We first encountered this problematic design probably about 15 years ago, and for all those years, Samsung has been creating repair kits to address the issue with varying degrees of success.

At first, they tried to modify the air duct channel for the fan inside the ice room. Then they released special Y-clips. Next, they modified the ice makers. Now they offer an expensive repair kit (two versions for the large 9-cube and small 6-cube ice makers) that includes a new ice maker, Y-clips kit, a larger diameter drain tube with a heater, and a new refrigerator control board. Imagine how bad it is if they invest so much in a repair kit! We won’t delve too deeply into the theory of why this happens, but the main problem is the gap between the refrigerator’s wall and the attached ice room with the ice maker. Over time, a gap appears in the ice maker cover. Over time, this gap allows warm, moist air from the refrigerator section to enter the ice room, causing heavy frost to accumulate and ultimately leading to the Samsung refrigerator ice maker not working.

Samsung Ice Maker Not Working: How We Fix It

We typically resolve this problem when the Samsung refrigerator ice maker is not working by correctly sealing the gap using a special silicone provided by Samsung, part number DA81-05595A. Instead of installing an expensive repair kit that costs around $260, we simply eliminate the gap. As a result, the ice maker resumes ice production.

We’ll Fix Your Appliance Quickly and Correctly

And most importantly, please do not attempt to defrost the ice maker with a heat gun or a hairdryer; you’ll likely heat the plastic to the point where it starts melting. In that case, replacing the ice maker is the only viable solution. Repairing it by melting the ice room housing is not feasible. Turn to us for assistance with ice machine repair in Tampa Bay Area or refrigerator repair in Tampa Bay Area. Each of our technicians has fixed such ice maker issues numerous times and knows how to correctly and swiftly rectify everything step by step. We provide a warranty for all our work, and our customers are always satisfied!

The repair was done in Brandon, FL

Also our company provides appliance repair services across various locations in Florida, including appliance repair service in Tampa Bay, Land O Lakes, Trinity, Zephyrhills, and more.

For dependable repairs, reach out to us today or schedule an appointment online for quick and efficient service.

GE range burners are not heating up, but the control panel is functional

The customer called us to report that the GE range burners are not heating up. We occasionally encounter this issue, and the repair turns out to be simple but unexpected for the customer. The key factor here is that the stove is powered by 240 volts (120+120), with all the heating elements operating on 240 volts (2 lines). However, the timer (control board) is powered by 120 volts (1 line). When contact is lost with one of the lines, the timer continues to function, but the heating elements do not. The oven light also works in this situation. Customers often believe the problem lies with the range, but it’s actually an issue with the electrical outlet. If the outlet is old or if the contact bolts are poorly tightened, the pin can heat up and burn out, leading to a loss of contact with one of the two lines.

GE Range Burners Are Not Heating Up: Repair

Frequently, as in our case, it’s necessary to replace not only the outlet but also the range’s power cord. Electrical permits are not required for this. We replace both the cord and the outlet, ensuring quality work for many years. Don’t hesitate to reach out to us for assistance. Our technicians will repair your range quickly, with a warranty on materials and labor!

The repair was done in Clearwater, FL

Ice machine not working at all: diagnose and fix

The customer said that ice machine does not work at all. But when checking the components in manual diagnostic mode, it turned out that everything is not so bad. During the component test, the water level sensor showed incorrect readings. When the machine was turned on in normal mode, the system was automatically tested, then the system find that the sensor was faulty, went into emergency mode and stopped for safety. After replacing the water level sensor, the machine began to work as expected.

GE range not heating up: one of the heating elements is not working

A customer contacted us with a complaint that their GE range not heating up. The wire connected to the heating element contact has burnt out. This is a common issue with the basic GE range model. The connector sometimes burns out through no fault of the customer. It’s simply a matter of time taking its toll.

GE range not heating up: repair

The easiest solution is to install a service kit with new connectors. The kit includes four connectors for all the elements, and the replacement process usually doesn’t take long.

In any case, we don’t recommend attempting this repair yourself because these connectors carry a high current, and the replacement must be done correctly. If you attempt a simple “twisting” method, there’s a high probability that the connection point will heat up and burn out. If you’re also facing issues like your GE Range oven not working, our technicians can handle that as well. We always have this service kit in stock and can fix such a malfunction during the first visit at an affordable price.

The repair was done in Belleair, FL

mw1