The gas is not igniting on one of the burners Frigidaire Range

A customer contacted us with a complaint that the gas is not igniting on burner of their Frigidaire range. During ignition, they could hear the sparking clicks, and the spark itself was visible, but the flame didn’t appear. During the diagnosis, our technician immediately noticed that the spark was not hitting the burner but the metall base, leading them to suspect a faulty igniter. Upon inspecting the ceramic insulator, they found a crack. This crack allowed current to flow through the insulator’s body, causing the spark to function improperly.

The gas is not igniting on the burner of the Frigidaire Range: Repair

We replaced the igniter, and the gas started igniting as expected. Any repair requires experience and skills, and our technicians are excellent specialists who can fix your stove without much difficulty. Feel free to reach out – we’re always ready to come and assist you!

The repair was done in Gulfport, FL

The LG refrigerator does not cool enough

A technician responded to a service call where the client complained that the LG refrigerator does not cool enough. The technician conducted a diagnostic and found that the evaporator was not producing enough cold.

Judging by the external signs of improper frosting, it was assumed that there might be a freon leak. The technician measured the pressure in the system, confirming the suspicion. After a high-pressure nitrogen test, it was discovered that the leak was minimal. Leak in evaporator could be fixed by adding stop-leak and recharging with Freon, avoiding replacement. The client agreed to this, and after that, the refrigerator started freezing properly again after the recharge. When dealing with issues in the sealed system, making the right decision requires extensive experience because a quick and easy fix doesn’t always work. Sometimes, you need to locate the leak and either weld it or replace the entire component, such as the evaporator coil or condenser coil.

LG refrigerator does not cool enough: Fix

We have the necessary experience and knowledge to work with sealed systems, and all our technicians are certified to handle freon, holding the appropriate certification. Whether your refrigerator is not cooling enough or you’re having trouble with the ice maker in the LG refrigerator, our team is well-equipped to handle the issue. Don’t hesitate to call us – we’re here to provide fast, reliable assistance and ensure your appliance is working as it should.






The repair was done in Madeira Beach, FL

Challenging Repair Case: Electrolux Washing Machine Motor Failure Due to Water Leak

The customer contacted us regarding a common issue – their Electrolux washing machine ceased functioning due to motor failure caused by a water leak. Upon inspection, our technician noticed water accumulation in the machine’s drip tray. The client explained that this had been happening for a while, with a small amount of water collecting during each wash. However, the water would dry up or be manually dried with a towel before the next laundry cycle, and the client had delayed seeking repairs.

Electrolux Washing Machine Motor Failure: Troubleshooting and Repair

Now, the washing machine had completely stopped working. Water was filling up, but the motor wasn’t turning. Our technician opened the rear inspection window and immediately observed severe rust on the motor. There was also a substantial layer of rust throughout the machine’s bottom. This indicated a prolonged water leakage issue.

During diagnostic mode, the technician confirmed voltage reaching the motor, yet the motor remained inert. Further investigation revealed a burnt working coil. The cause was quickly identified when the technician removed the top cover of the washing machine. The drain hose from the pump runs along the left side, secured by a clamp. The clamp had broken. This caused the hose to gradually sag under the weight of water, bending several inches towards the drum.

Above the drum, there is a large rubber tube connecting it to the dispenser. As the drum vibrates during operation, this tube and the drain hose would rub against each other. Over time, this friction wore down the rubber tube, resulting in a breach. At the start of each cycle, water from the dispenser would seep down the left side of the drum, exactly where the motor is located.

This continued for an extended period until the motor coil shorted and burnt out. Consequently, two parts needed replacement: the rubber tube connecting the dispenser to the drum and the drain hose.

Smart Appliance Services to the Rescue

These unique cases highlight how one malfunctioning part can lead to the failure of another, sometimes necessitating the replacement of multiple components. Regardless of the complexity, our team at Smart Appliance Services is always ready to assist. Our experienced professionals have encountered numerous interesting breakdowns, and we are committed to resolving any issues promptly. Give us a call, and we’ll be sure to help!

The repair was done in Clearwater, FL

Frigidaire Refrigerator Leaking Water Issue Repair

We had a case of a Frigidaire refrigerator leaking water from under the refrigerator. Such cases are always interesting because it’s like being a bit of Sherlock Holmes. Water can leak due to a clogged defrost drain or issues with the refrigerator’s water system.

Frigidaire Refrigerator Leaking Water: Troubleshooting and Fix

The technician inspected the freezer for water and found nothing, which indicates that the drain is clear. Next, the technician pulled out the refrigerator and began inspecting the inlet water valve. Immediately, they discovered that the tube leading from the valve to the water filter had a crack. Every time the customer dispensed water from the dispenser or the ice maker filled with water, it would leak through this crack onto the floor. Unfortunately, you can’t simply cut and reinsert this tube into the inlet valve because it has a special connection, so the entire filter housing needed to be replaced, which we did. Such breakdowns occur due to either the poor quality of the part or simply over time.

We know how to repair any appliance properly, so feel free to schedule an appointment online for assistance.

The repair was done in Largo, FL

The Samsung refrigerator is not working, it’s warm inside

We received a service call for a Samsung refrigerator that was completely not working and warm inside. The lights were on, and the user interface was functioning.

It was determined that there was no voltage going to the compressor from the inverter board, despite the control signal coming from the main board. After replacing the inverter board, the refrigerator started working again. Our technician conducted the correct diagnostics, leading to the restoration of the refrigerator’s functionality. The experience of our technicians is the key to our company’s quality service!

The repair was done in Gulfport, FL

Loud noise during the working cycle Electrolux Dryer

During the diagnosis we found out that noise was from the blower wheel. Its mount to the motor broke for some reason and was fractioning on the blower housing walls. Since it is an inseparable part in the given dryer model we changed the whole blower wheel assy.

In the GE refrigerator the ice does not come out when trying to dispense it

Client called us to resolve the problem with the GE refrigerator: the ice does not come out when trying to dispense it, even though the ice bin is full and the ice maker is working correctly.

We encounter this issue with old GE refrigerators. The problem was that GE used to make the auger in the ice bin out of plastic. Sometimes, the plastic auger would crack and break. Nowadays, GE manufactures the auger entirely with metal, so this problem no longer occurs. In this case, the outermost coil of the auger broke, preventing it from grabbing the ice in the bin and moving it forward.

How we fixed the issue with the GE refrigerator in which the ice does not come out

The problem is easily resolved by installing a new upgraded ice bin with a metal shaft. We collaborate with the largest suppliers in the USA, ensuring access to a vast inventory of parts. Our partnerships with leading suppliers enable us to deliver any part you need within days.

The repair was done in Dunedin, FL

Maytag Washing Machine F32 Error Code: Stopping Mid-Cycle

A customer contacted us regarding an issue with their Maytag washing machine displaying error code F32. The washer was stopping midway through the cycle and displaying an F32 error. Our technician conducted a diagnostic visit and, consulting the technical documentation, identified that the F32 error was related to the malfunctioning drain. This error typically occurs when the drain pump is burned out or there is a blockage in the drain system. This prevents the washing machine from draining water.

However, during the diagnostic process, the technician observed that the washing machine was indeed draining water, creating confusion about the cause of the error. Subsequently, the technician decided to inspect the drain pump, suspecting potential obstructions. Upon investigation, it was discovered that the impeller of the pump motor was partially damaged. One of the four blades on the impeller was found to be broken. This damage caused the pump to function, but the compromised impeller slowed down the drainage process.

The control board of this machine operates in a way that it counts a timeout. When it initiates water drainage, it has a specific timeframe in its memory during which the washing machine should complete the drainage. If, within this time and a small buffer, the machine fails to drain water, it triggers the F32 error, halting the operation.

Maytag Washing Machine Error Code F32: Fix

In our case, although there was drainage, it was twice as slow. Consequently, the water couldn’t drain within the designated timeframe, prompting the Maytag washing machine F32 error. With a comprehensive inventory of spare parts on our service vehicles, we had the necessary pump in stock. The technician promptly replaced the faulty pump, enabling the washing machine to fully drain water and resume operation without any errors.

If you encounter perplexing situations with your appliances, you can always rely on us. Our team of professionals is highly skilled and dedicated to resolving appliance issues efficiently!

The repair was done in Safety Harbor, FL

For professional appliance repair in Safety Harbor, contact us now.

The freezer doesn’t cool enough, and it’s very warm inside the GE refrigerator

A customer called us with a problem with their GE refrigerator: the freezer doesn’t cool enough, and it’s very warm inside. Our technician conducted a diagnosis. The temperature inside the refrigerator was around 65 degrees, while the freezer was about 25 degrees. At first glance, the technician understood the problem, which we call a defrost issue.

Inside the freezer, there is an evaporator coil that produces cold air, and a fan circulates air through this coil. During the day, the coil accumulates frost and snow due to condensation. Once a day, the control board melts frost below the coil for better air circulation. The defrost function in this model involves the defrost heater, defrost thermostat, defrost thermistor, and the control board.

GE refrigerator freezer doesn’t cool enough and it’s warm inside: Fix

In our case, the tubular heater burned out, and the defrost cycle stopped working, leading to frost accumulation. The evaporator coil began to be completely blocked by this frost in about a week. Air circulation ceased, and the temperature in the freezer began to rise. The fresh food section also draws air from this evaporator coil through a special damper, and due to the restriction, the temperature there also increased.

If you’re also dealing with issues like water leaking from a GE refrigerator, this could be another sign of a malfunctioning component that we can resolve. Each of our technicians always keeps this model of heater in stock, and this time, the technician repaired the refrigerator during the first visit. Call us for your refrigerator repair; we have a variety of parts in stock and are ready to perform the repair quickly and with a warranty!

The repair was done in Clearwater, FL

Circulation pump leakage KitchenAid Dishwasher

During the work cycle the dishwasher was leaking and the customer asked us to fix it. The reason of the leakage was depressurization of the body of circulation pump, so it needed to be replaced. But the costs of work on replacing and the part itself were comparable to the price of new dishwasher. Therefore, the client decided not to repair the dishwasher and purchase a new one.